Bissell Proheat 2x Revolution Pet Pro Belt Change
If you are someone who owns a pet, you know how difficult it can be to keep your home clean. With pets at home, it is quite common to have some mess around. The Bissell Proheat 2x Revolution Pet Pro is a perfect solution to this problem. It is a powerful carpet cleaner that can help you clean your carpets and upholstery with ease. However, like any other appliance, the Bissell Proheat 2x Revolution Pet Pro may also need some maintenance from time to time. One such maintenance task is changing the belt of the Bissell Proheat 2x Revolution Pet Pro.
Why should you change the belt of the Bissell Proheat 2x Revolution Pet Pro?
The belt is a critical component of the Bissell Proheat 2x Revolution Pet Pro. It connects the brush roll motor to the brush roll and helps the brush roll rotate. Over time, the belt may wear out, become stretched, or even break. A worn-out or stretched belt can lead to reduced cleaning performance, which defeats the purpose of owning a powerful carpet cleaner like the Bissell Proheat 2x Revolution Pet Pro.
When should you change the belt of the Bissell Proheat 2x Revolution Pet Pro?
The frequency of changing the belt of the Bissell Proheat 2x Revolution Pet Pro depends on how often you use the appliance. If you use the carpet cleaner regularly, you should change the belt every 6 months. If you use it less frequently, you can change the belt once a year. However, if you notice any of the following signs, it is time to change the belt:
- The brush roll is not rotating
- There is a burning smell
- The brush roll is making strange noises
How to change the belt of the Bissell Proheat 2x Revolution Pet Pro?
The belt of the Bissell Proheat 2x Revolution Pet Pro is located underneath the appliance. To change the belt of the Bissell Proheat 2x Revolution Pet Pro, follow the steps below:
Step 1: Turn off and unplug the appliance.
Before you start, turn off the Bissell Proheat 2x Revolution Pet Pro and unplug it from the power source. This is important for your safety.
Step 2: Remove the brush roll cover.
Locate the brush roll cover and remove it. The brush roll cover may be clipped in place or held in place by screws. Refer to the user manual of the Bissell Proheat 2x Revolution Pet Pro to locate the brush roll cover and how to remove it.
Step 3: Remove the brush roll.
After removing the brush roll cover, you will see the brush roll. Remove the brush roll carefully from its housing.
Step 4: Remove the old belt.
Remove the old belt from the motor shaft and the brush roll. You can do this by stretching the belt and sliding it off the motor shaft and brush roll.
Step 5: Install the new belt.
Install the new belt on the motor shaft and the brush roll. Make sure the belt is fitted snugly on the motor shaft and the brush roll.
Step 6: Reassemble the brush roll and cover.
Reinstall the brush roll carefully in its housing. Make sure it is placed correctly. After that, reinstall the brush roll cover. If the brush roll cover was held in place by screws, make sure you reinsert and tighten the screws.
Step 7: Test the appliance.
Plug the Bissell Proheat 2x Revolution Pet Pro back into the power source and turn it on. Let it run for a few seconds to ensure that the belt is working correctly. If you hear any strange noises, turn off the appliance and check the belt installation again.
Conclusion
Changing the belt of the Bissell Proheat 2x Revolution Pet Pro is a straightforward task that can help to maintain the performance of the carpet cleaner. Follow the steps outlined above, and you will have no problems changing the belt of the Bissell Proheat 2x Revolution Pet Pro. Remember to replace the belt every six months if you use the carpet cleaner regularly or once a year if you use it less frequently. This will ensure that your Bissell Proheat 2x Revolution Pet Pro remains in good working condition for years to come.
