Brute Force 750 Belt Light Reset With Paperclip
If you are a proud owner of a Kawasaki Brute Force 750 ATV, then you know that it is a powerful machine capable of handling all kinds of rough terrains. However, just like any other machine, it can develop some problems over time. One of the most common issues faced by Brute Force 750 owners is the belt light coming on. This can be due to various reasons like a worn-out belt, low belt tension, or even an electrical issue.
When the belt light comes on, it is an indication that there is something wrong with the belt system, and it needs to be fixed. However, fixing the issue is not always straightforward, and sometimes it requires a trip to the dealer, which can be time-consuming and costly. Fortunately, there is a simple and quick way to reset the belt light using a paperclip.
Step By Step Guide To Resetting The Belt Light
Here is a step by step guide on how to reset the belt light using a paperclip:
Step 1: Turn Off The Engine
The first step is to turn off the engine and ensure that the key is in the off position. This will prevent any potential electrical issues when resetting the belt light with the paperclip.
Step 2: Locate The Belt Light Plug
The next step is to locate the belt light plug. It is located on the right side of the ATV, behind the front wheel, just below the headlight. You may need to remove the plastic cover to access it.
Step 3: Disconnect The Belt Light Plug
Use a pair of pliers or your fingers to disconnect the belt light plug. You should see two wires connected to the plug. One wire will be green, and the other will be black.
Step 4: Short Circuit The Belt Light Plug
Take a paperclip and straighten it out. Insert one end of the paperclip into the green wire's connector on the bike's side and the other end into the black wire's connector. This will short circuit the plug, which will reset the belt light.
Step 5: Turn On The Ignition
Turn on the ignition, but don't start the engine. You should see the belt light come on for five seconds and then go off. This indicates that the belt light has been successfully reset.
Step 6: Reconnect The Belt Light Plug
Once the belt light has been reset, reconnect the belt light plug back to its original position. Make sure it is securely connected.
Step 7: Start The Engine
Start the engine and ensure that the belt light remains off. If it does, then the problem has been resolved, and you can continue riding your Brute Force 750 without worrying about the belt light coming on.
Conclusion
The Brute Force 750 is a powerful machine capable of handling tough terrains. However, just like any other machine, it can develop issues over time. One of the most common issues is the belt light coming on. While fixing the problem can be time-consuming and costly, resetting the belt light with a paperclip is simple and quick. Following the above steps should help you reset the belt light on your Brute Force 750 ATV easily.
