Which Side Of Dryer Belt Goes Against Drum
Dryer belts are an essential part of your dryer, and they are responsible for rotating the drum. However, over time, these belts can wear out, stretch or break. When this happens, you will need to replace the belt, but before you do that, it's essential to know which side of dryer belt goes against drum.
What is a Dryer Belt?
The dryer belt is a flat, rubber-based belt that connects the motor to the drum of the dryer. It is responsible for rotating the drum when the machine is in use. The belt is stretched tightly around the drum and motor, and it is held in place by a tensioner. The tensioner keeps the belt tight so that it can rotate the drum without slipping or sliding off.
How to Replace a Dryer Belt?
If you notice that your dryer belt has worn out or broken, you will need to replace it. Here is how to replace a dryer belt:
- Unplug the dryer from the power source.
- Remove the front panel of the dryer.
- Release the tension on the belt by moving the tensioner away from the belt.
- Remove the old belt from the drum and motor.
- Place the new belt around the drum, with the ribbed side facing inward.
- Loop the belt around the motor pulley, making sure that it is tight.
- Move the tensioner back into position, so that it puts tension on the belt.
- Replace the front panel of the dryer.
- Plug the dryer back into the power source, and test it to make sure it is working properly.
Which Side of Dryer Belt Goes Against Drum?
Now that you know how to replace a dryer belt, it's essential to know which side of the dryer belt goes against the drum. The dryer belt has two sides, a smooth and a ribbed side. The ribbed side goes against the drum, while the smooth side contacts the motor pulley.
The ribbed side is designed to grip the drum better than the smooth side, creating more friction and allowing the belt to rotate the drum more effectively. The smooth side is less grippy, making it ideal for contacting the motor pulley with less resistance.
Tips for Maintaining Your Dryer Belt
Maintaining your dryer belt can help extend its lifespan and prevent it from wearing out or breaking. Here are some tips for maintaining your dryer belt:
- Regularly clean the lint filter to prevent lint build-up, which can cause the belt to wear out faster.
- Make sure that the dryer is level, as an uneven dryer can put additional strain on the belt.
- Check the tensioner regularly to make sure it is putting enough tension on the belt.
- Inspect the belt for signs of wear or stretching, and replace it if necessary.
Conclusion
In conclusion, replacing a dryer belt is a relatively simple process, but it's essential to know which side of dryer belt goes against drum. The ribbed side should be in contact with the drum, while the smooth side should be in contact with the motor pulley. By following the tips for maintaining your dryer belt, you can help extend its lifespan and keep your machine running smoothly.