Craftsman Lawn Edger/Trencher 550 Series Belt Replacement
When it comes to maintaining a beautiful lawn, the Craftsman Lawn Edger/Trencher 550 Series can be an indispensable tool. But over time, the belt that drives this machine will wear out and need to be replaced. In this article, we will guide you through the process of replacing the belt on your Craftsman Lawn Edger/Trencher 550 Series.
What You Will Need
Before you begin, make sure you have the following tools and materials:
- Socket wrench set
- Flathead screwdriver
- New replacement belt
Step 1 – Remove the Belt Cover
The first step in replacing the belt on your Craftsman Lawn Edger/Trencher 550 Series is to remove the belt cover. To do this, use your socket wrench set to remove the bolts that secure the belt cover to the machine. Once the bolts have been removed, carefully lift the belt cover off the machine and set it aside.
Step 2 – Remove the Old Belt
Next, you will need to remove the old belt from the machine. To do this, locate the tensioner pulley and use your socket wrench set to release the tension by turning the pulley. Once the tension has been released, slip the old belt off the pulleys.
Step 3 – Install the New Belt
Now it's time to install the new belt. Begin by slipping the new belt over the drive pulley and onto the tensioner pulley. Use your socket wrench set to apply tension to the belt by turning the tensioner pulley. The belt should be taut but not overly tight.
Step 4 – Reassemble the Belt Cover
Finally, it's time to reassemble the belt cover. Carefully align the cover with the machine and reinstall the bolts using your socket wrench set. Be sure to tighten the bolts securely but not so tight that they strip the threads.
Conclusion
If you follow these steps, you should be able to replace the belt on your Craftsman Lawn Edger/Trencher 550 Series with ease. Remember to take your time and work carefully, and soon your machine will be running smoothly once again.
