96 Honda Accord 2.2 Timing Belt Replacement
Replacing the timing belt on your 96 Honda Accord 2.2 is an important maintenance task that should be done every 90,000 to 105,000 miles. Failing to replace the timing belt can cause serious engine damage and potentially leave you stranded on the side of the road. In this guide, we will walk you through the steps to replace the timing belt on your 96 Honda Accord 2.2.
Step 1: Gather Your Tools and Parts
Before you begin, you will need to gather the necessary tools and parts. You will need a socket set, torque wrench, timing belt kit (including the timing belt, water pump, tensioner, and idler pulley), jack stands, and a jack.
Step 2: Disconnect the Battery
The first step is to disconnect the battery. This will prevent any electrical shocks or damage to the electrical system during the replacement process.
Step 3: Remove the Drive Belts and Timing Belt Cover
Next, you will need to remove the drive belts and timing belt cover. This will give you access to the timing belt and its components. Make sure to keep any bolts or nuts that are removed in a safe place, as they will be needed later during reassembly.
Step 4: Remove the Timing Belt Tensioner
The timing belt tensioner is responsible for keeping the timing belt tight. You will need to remove it to access the timing belt. Be sure to keep any bolts that are removed in a safe place.
Step 5: Remove the Timing Belt
Now that the tensioner is removed, you can remove the timing belt. Be sure to mark the timing belt and the camshaft and crankshaft pulleys before removing it, so that you can properly align everything during reassembly.
Step 6: Replace the Water Pump, Tensioner, and Idler Pulley
Now that the timing belt is removed, it is a good time to replace the water pump, tensioner, and idler pulley. These components typically wear out around the same time as the timing belt, and replacing them all at once will save you time and money in the long run.
Step 7: Install the New Timing Belt
Now it’s time to install the new timing belt. Begin by aligning the camshaft and crankshaft pulleys with the marks you made earlier. Make sure the timing belt is properly tensioned, and that all components are properly aligned.
Step 8: Reassemble the Engine
With the new timing belt installed, it’s time to reassemble the engine. Replace the timing belt cover, drive belts, and any other components that were removed during the process. Make sure to torque all bolts and nuts to the manufacturer’s specifications.
Step 9: Reconnect the Battery
Finally, it’s time to reconnect the battery. Start the engine and make sure everything is running smoothly. Congratulations, you have successfully replaced the timing belt on your 96 Honda Accord 2.2!
Following these steps will ensure that your 96 Honda Accord 2.2’s timing belt is replaced correctly, reducing the risk of engine damage and ensuring that your engine will run smoothly for many more miles to come.