Briggs And Stratton Snow Blower Belt Keeps Coming Off
If you live in an area that experiences heavy snowfall, then you know how frustrating it can be to have a snow blower that just won't work properly. One of the most common issues users face with Briggs and Stratton snow blowers is the belt coming off while in use. This issue can be caused by a number of reasons, which we'll explore in this article. We'll also provide you with some tips on how to prevent the belt from coming off in the future.
What causes the belt to come off?
There are several reasons why the belt on your snow blower might come off while in use:
- Worn out or damaged belt: Over time, the belt on your snow blower can become worn out or damaged, causing it to slip off its pulleys. If you notice any signs of wear or damage on the belt, it's time to replace it.
- Loose or worn pulleys: The pulleys that move the belt can also become worn out or loose over time. This can cause the belt to slip off the pulleys or make a squealing noise. If you notice any issues with the pulleys, you may need to have them replaced.
- Incorrect belt tension: If the belt on your snow blower is too loose or too tight, it can cause it to slip off the pulleys. Your manual should provide instructions on how to adjust the belt tension for your specific model of snow blower.
- Misaligned pulleys: If the pulleys on your snow blower are not aligned properly, it can cause the belt to come off. This can happen if the bolts that hold the pulleys in place become loose or if the bearings in the pulleys wear out.
- Foreign object in the belt path: Sometimes, a foreign object like a stick or a rock can get caught in the belt path, causing the belt to come off.
Identifying the cause of the problem is the first step to fixing it. Once you've figured out why the belt is coming off, you can take steps to prevent it from happening again in the future.
How to prevent the belt from coming off
Here are some tips on how to prevent the belt on your Briggs and Stratton snow blower from coming off:
- Inspect the belt regularly: Check the condition of the belt on a regular basis. If you notice any signs of wear or damage, replace the belt immediately.
- Maintain proper belt tension: Make sure the belt tension is set correctly according to your manual. If the belt is too loose or too tight, it can cause it to slip off the pulleys.
- Inspect the pulleys: Check the pulleys on your snow blower for signs of wear or damage. If any of the pulleys are loose or worn out, they will need to be replaced.
- Keep the belt path clear: Make sure the belt path is clear of any debris or foreign objects that could get caught in the belt.
- Align the pulleys: Check to make sure the pulleys on your snow blower are properly aligned. If they are not, you may need to tighten or replace the bolts that hold them in place.
Conclusion
If the belt on your Briggs and Stratton snow blower keeps coming off, don't despair. With a little bit of troubleshooting and some preventative maintenance, you can get your snow blower working properly again in no time. Remember to inspect the belt and pulleys regularly, maintain proper belt tension, and keep the belt path clear of any foreign objects. By following these tips, you can prevent the belt from coming off and keep your snow blower running smoothly all winter long.
