Cub Cadet 3 Stage Snow Blower Auger Belt Replacement
If you own a Cub Cadet 3 stage snow blower, you know how important it is to keep it in good condition. Part of that maintenance includes replacing the auger belt when necessary. In this article, we will go over everything you need to know about Cub Cadet 3 stage snow blower auger belt replacement.
When to Replace the Auger Belt
The auger belt on your Cub Cadet 3 stage snow blower should be replaced if it is worn, stretched, or broken. A worn or stretched belt may slip, causing the auger to not work properly, while a broken belt will stop the auger from working altogether. It is recommended that you inspect the auger belt before each use of your snow blower.
Tools Needed for Replacement
The tools you will need for Cub Cadet 3 stage snow blower auger belt replacement include:
- Socket set
- Wrench set
- New auger belt
Steps for Replacement
Follow these steps to replace the auger belt on your Cub Cadet 3 stage snow blower:
- Disconnect the spark plug wire from the spark plug to prevent accidental starting.
- Remove the belt cover by removing the bolts holding it in place.
- Loosen the idler pulley bolt and slide the idler pulley towards the engine to release tension on the belt.
- Remove the old belt from the pulleys and auger drive system.
- Install the new belt on the pulleys and auger drive system.
- Reposition the idler pulley to create tension on the belt and tighten the idler pulley bolt.
- Reinstall the belt cover and tighten the bolts.
- Reconnect the spark plug wire to the spark plug.
Tips for Successful Replacement
Here are some tips to help make Cub Cadet 3 stage snow blower auger belt replacement a success:
- Consult the owner's manual that came with your snow blower for specific instructions on belt replacement.
- Make sure the new belt is the correct size for your snow blower.
- Keep your snow blower well-maintained to prevent premature belt wear and tear.
- Inspect the belt frequently for signs of wear and tear.
- Replace the belt at the first sign of wear or damage.
Conclusion
Replacing the auger belt on your Cub Cadet 3 stage snow blower may seem like a daunting task, but it is a necessary part of snow blower maintenance. By following the steps outlined in this article and using the proper tools, you can successfully replace the auger belt and keep your snow blower running smoothly all winter long.
