Dirt Devil Power Max Rewind Pet Belt Replacement
If you own a Dirt Devil Power Max Rewind Pet vacuum cleaner, you know how important it is to keep it in good working condition. One part of the vacuum that may need replacement over time is the belt. In this article, we will guide you through the process of replacing the belt on your Dirt Devil Power Max Rewind Pet vacuum cleaner.
What You Will Need
Before starting the belt replacement process, make sure you have the following tools and supplies:
- New belt for Dirt Devil Power Max Rewind Pet
- Phillips head screwdriver
- Flat head screwdriver
- Towel or rag
Step-by-Step Guide to Replacing the Belt
Follow these simple steps to replace the belt on your Dirt Devil Power Max Rewind Pet vacuum cleaner:
Step 1: Turn off and unplug the vacuum cleaner
Before you start the replacement process, turn off the vacuum cleaner and unplug it from the power source. This will prevent any accidents from happening while you are working on the machine.
Step 2: Remove the dustbin and filter
Next, remove the dustbin and filter from the vacuum cleaner. This will give you access to the belt and motor.
Step 3: Remove the bottom plate
Using a Phillips head screwdriver, remove the screws on the bottom plate of the vacuum cleaner. This will give you access to the brush roll and belt.
Step 4: Remove the brush roll
Once the bottom plate has been removed, take out the brush roll carefully. This will give you access to the belt and motor.
Step 5: Replace the belt
Remove the old belt from the motor shaft and the brush roll. Replace it with the new belt by wrapping it around the motor shaft and the brush roll. Make sure the belt is properly aligned and not twisted.
Step 6: Reassemble the vacuum cleaner
Put the brush roll back in place and reattach the bottom plate using the screws that were removed earlier. Replace the dustbin and filter. Your Dirt Devil Power Max Rewind Pet vacuum cleaner is now ready to use.
Conclusion
Replacing the belt on your Dirt Devil Power Max Rewind Pet vacuum cleaner is a simple process that can be done with just a few tools and a little bit of know-how. By following the steps outlined above, you can keep your vacuum cleaner in good working condition and ensure that it continues to pick up pet hair and dirt from your floors and carpets. Remember to always turn off and unplug your vacuum cleaner before attempting any repairs or replacements.