Skip to content Skip to sidebar Skip to footer

Genie 1.25 Hp Belt Drive Garage Door Opener Installation

Genie Garage Door Opener Installation

Introduction

Are you tired of manually opening and closing your garage door every time you need to drive in or out? Installing a garage door opener can save you time and effort. Genie, a well-known company in the garage door industry, offers a 1.25 horsepower belt drive garage door opener that is easy to install and operate. In this article, we will go through the steps to install the Genie 1.25 Hp Belt Drive Garage Door Opener.

Before You Start

Genie Garage Door Opener

Before you start installing your Genie garage door opener, make sure to read the installation manual thoroughly. Make sure that you have all the necessary tools and materials required for the installation. A few of the essential tools include:

  • Power drill and bits
  • Socket wrench and pliers
  • Tape measure and level
  • Screwdriver

Installation Steps

Step 1: Attach the Rail to the Motor Unit

Genie Garage Door Opener Rail

Connect the rail to the motor unit using the provided hardware. Make sure to align the rail and motor unit precisely before tightening the bolts.

Step 2: Install the Trolley on the Rail

Genie Garage Door Opener Trolley

Slide the trolley onto the rail and secure it with the cotter pin provided in the hardware kit.

Step 3: Mount the Rail to the Ceiling

Genie Garage Door Opener Mounting

Mount the rail to the ceiling using the provided straps and fasteners. Make sure that the rail is level and secure.

Step 4: Attach the Belt to the Trolley and Motor Unit

Genie Garage Door Opener Belt

Attach the belt to the trolley and motor unit according to the instructions in the manual. Make sure that the belt is not twisted and is snugly fitted.

Step 5: Install the Safety Reversing Sensors

Genie Garage Door Opener Sensors

Mount the safety reversing sensors to the garage door tracks using the provided brackets. Connect the wiring of the sensors to the motor unit according to the instructions provided.

Step 6: Wire the Wall Control and Remote

Genie Garage Door Opener Wall Control

Wire the wall control and remote following the instructions provided. Make sure that the wiring is neat and connected correctly before testing the opener.

Conclusion

By following these installation steps thoroughly, you will have a properly functioning Genie 1.25 Hp Belt Drive Garage Door Opener in no time. Enjoy the convenience and safety of operating your garage door with just a touch of a button!

Related video of Genie 1.25 Hp Belt Drive Garage Door Opener Installation Guide