Skip to content Skip to sidebar Skip to footer

Troy Bilt 42 Riding Mower Drive Belt Diagram

Troy Bilt 42 Riding Mower Drive Belt Diagram

If you own a Troy Bilt 42 Riding Mower, it is important to know how to replace the drive belt when it wears out. The drive belt is responsible for transferring power from the mower's engine to the wheels, allowing it to move forward or backward. Over time, the drive belt can become frayed or worn, which can lead to decreased performance and even damage to the mower. Here, we will discuss the steps to replace the drive belt for a Troy Bilt 42 Riding Mower.

Tools and materials

Tools And Materials For Replacing Drive Belt

Before you start, gather the tools and materials needed. You will need a socket wrench, a torque wrench, a belt tension gauge, a new drive belt, a jack, and jack stands. Make sure that you have the correct size drive belt for your Troy Bilt 42 Riding Mower.

Steps to replace the drive belt

Steps To Replace Drive Belt

Step 1: Prepare your mower
First, park your Troy Bilt 42 Riding Mower on a flat and level surface. Turn off the engine and remove the key. Engage the parking brake and disconnect the spark plug wire to prevent accidental start-up. Use a jack to lift up the front of the mower, and secure it with jack stands.

Step 2: Remove the old drive belt
Locate the old drive belt on the mower deck. Use a socket wrench to loosen the bolts that secure the belt covers. Then, remove the belt covers and carefully remove the old drive belt from the pulleys.

Step 3: Install the new drive belt
Take your new drive belt and route it around the pulleys in the same way as the old belt. Follow the diagram provided in the owner's manual or on the mower deck itself to ensure that you are routing the belt correctly. Use a belt tension gauge to measure the tension of the new belt. Adjust the tension as needed.

Step 4: Replace the belt covers
Once the new drive belt is installed and tensioned correctly, reattach the belt covers and tighten the bolts with a torque wrench. Be sure to check the belt tension again after tightening the bolts.

Step 5: Lower your mower
Use your jack to lower the mower back down to the ground. Remove the jack stands and check the drive belt one more time to ensure that it is properly routed and tensioned.

Tips for maintaining your drive belt

Maintaining Drive Belt

Now that you have replaced your drive belt, you can help extend its lifespan by following a few maintenance tips. First, inspect your drive belt regularly for signs of wear or damage, and replace it as needed. Second, keep your mower deck clean and free of debris, as this can cause the belt to wear down more quickly. Finally, always use the manufacturer-recommended drive belt for your Troy Bilt 42 Riding Mower to ensure that it operates correctly.

Conclusion

Replacing the drive belt on your Troy Bilt 42 Riding Mower is an important part of maintaining its performance and ensuring its longevity. By following the steps outlined here, you can replace your drive belt easily and safely. Always remember to follow the manufacturer's instructions and safety guidelines when working on your mower. With proper maintenance, your Troy Bilt 42 Riding Mower can continue to provide reliable service for years to come.

Related video of Troy Bilt 42 Riding Mower Drive Belt Diagram